Revit MEP

Reply
New Member
jberg
Posts: 2
Registered: ‎11-20-2013
Message 1 of 3 (135 Views)
Accepted Solution

Receptacle family view styles

135 Views, 2 Replies
11-20-2013 02:35 PM

Revit MEP duplex receptacle displays plan view symbol (two lines w/a circle) in enlarged (1/8" = 1'-0") scale view (created with callout) but displays as a 3D style symbol in Floor Plan - Level 1 (1" = 20' scale) view.  I've changed scale factors and deleted/recreated symbols starting in both views to no avail.  Any help would be appreciated.

 

Jeff

Check the detail level of the 1"=20' plan, it may be set to Fine.
*Expert Elite*
abulla
Posts: 356
Registered: ‎10-14-2008
Message 2 of 3 (128 Views)

Re: Receptacle family view styles

11-20-2013 03:09 PM in reply to: jberg
Check the detail level of the 1"=20' plan, it may be set to Fine.
New Member
jberg
Posts: 2
Registered: ‎11-20-2013
Message 3 of 3 (125 Views)

Re: Receptacle family view styles

11-20-2013 03:14 PM in reply to: abulla

That was it.  Thanks.  Such a simple and stupid (on my part) solution.  Too much for this old brain to remember sometimes.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.