Revit MEP

Reply
New Member
2 Posts
0 Kudos
Registered: ‎08-14-2007
Post 1 of 4

Projecting Centerlines

195 Views, 3 Replies
09-14-2012 12:32 PM

All elevation views including arch views with MEP linked model are displaying pipe, duct, conduit, etc. Centerlines as if they were projecting to the outside wall. (looks like buckshot crosshairs.

 

I am able to turn them off centerlines in VG but that is a big effort over many views.

Any thoughts on what can be controlling this apparent projection?

 

Elevation View.png

Valued Mentor
458 Posts
108 Kudos
Registered: ‎06-16-2010
Post 2 of 4

Re: Projecting Centerlines

09-17-2012 02:53 AM in reply to: jbecker

How about try using view templates to control the visibility of centrelines for various elements?

The view's detail level will also affect how these display.

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
New Member
2 Posts
0 Kudos
Registered: ‎08-14-2007
Post 3 of 4

Re: Projecting Centerlines

09-17-2012 04:15 AM in reply to: julianjameson8403

Yes, we are using view templates to correct the problem. Still a labor effort. Thanks.

The question is why the centerline "projection" is occurring in the first place. Are there any control options for centerlines which would limit the visibility?

I do not understand why (single example) a pipe 50 feet inside the building is "projecting" its centerline thru the outside wall. The pipe does even run perpindicular to the wall. It is a open end pipe not yet connected to anything else.

Any additional thoughts would be appreciated.

Product Support
415 Posts
35 Kudos
Registered: ‎06-27-2010
Post 4 of 4

Re: Projecting Centerlines

09-18-2012 07:00 AM in reply to: jbecker

I would check the depth of the elevation to make sure the pipes that are showing are not in it. I would also check to see if depth clipping is on or off.



Chris Aquino
Knowledge Domain Expert
Customer Service & Support
Autodesk, Inc.


The Revit Clinic
@Revitclinic
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!