Revit MEP

Reply
Member
miguelvalencia5598
Posts: 5
Registered: ‎12-20-2010
Message 1 of 3 (249 Views)
Accepted Solution

Pressure Loss Report Location

249 Views, 2 Replies
09-11-2012 01:21 PM

Is there a way to change the default out put location of the "PressureLossReportFormats.xml" that is generated by Revit when creating a Pressure Loss Report?

According to Autodesk WikiHelp, it is .."saved in the same location as the default template." The problem is that our default template location is on the network w/ read-only access, thus creating an error everytime we try to create a report.

 

Thanks,

Miguel

We figured it out. It is controlled thru the INI under:
[Directories]
DefaultTemplate= <Location of template file>

Since the PressureLossReportFormats.xml needs constant read/write access and in order not to have many users save back to it (overwritting the PressureLossReportFormats.xml) by adding their own custom formats, we decided it was best to keep it under each users C: drive rather than on the network. This will keep the .xml file clean.

New Member
brg34
Posts: 1
Registered: ‎10-16-2007
Message 2 of 3 (184 Views)

Re: Pressure Loss Report Location

09-27-2012 01:47 PM in reply to: miguelvalencia5598

We are having this same issue.  Does anyone have a fix for this? 

 

Thanks,

~Brett

Member
miguelvalencia5598
Posts: 5
Registered: ‎12-20-2010
Message 3 of 3 (182 Views)

Re: Pressure Loss Report Location

09-27-2012 01:51 PM in reply to: brg34

We figured it out. It is controlled thru the INI under:
[Directories]
DefaultTemplate= <Location of template file>

Since the PressureLossReportFormats.xml needs constant read/write access and in order not to have many users save back to it (overwritting the PressureLossReportFormats.xml) by adding their own custom formats, we decided it was best to keep it under each users C: drive rather than on the network. This will keep the .xml file clean.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.