Revit MEP

Reply
Active Contributor
magnolouis
Posts: 32
Registered: ‎06-21-2011
Message 1 of 4 (171 Views)
Accepted Solution

Pressure Drop Tagging

171 Views, 3 Replies
01-20-2014 03:19 AM

Hi All,

 

My Firm is just new and we are trying to implement a fully BIM Projects and right now My BIM Manager is working out on the Pressure Loss Report which Revit "Automatically produce" but our question is how to include Pressure Drop value in the Tagging? We tried doing the right way but it wont show even on the Duct Branches or in the Main Duct run is the multiple values has something to do with this?

 

Any Comments will be very much apprciated

 

Thank you...

 

L.Magno

 

BIM Modeller

Hi L.Magno,

 

I think there are 2 solutions:

 

1. Annotate - Color Fill - Duct Legend - Pressure Drop

 

2014-01-21_155233.png

 

2. Modify - Split Element to divide your Ducts to smaller parts

 

2014-01-21_160025.png

Hope these solutions will help!

*Expert Elite*
*Expert Elite*
me
Posts: 30
Registered: ‎09-12-2011
Message 2 of 4 (136 Views)

Re: Pressure Drop Tagging

01-21-2014 04:01 AM in reply to: magnolouis

Hi L.Magno,

 

I think there are 2 solutions:

 

1. Annotate - Color Fill - Duct Legend - Pressure Drop

 

2014-01-21_155233.png

 

2. Modify - Split Element to divide your Ducts to smaller parts

 

2014-01-21_160025.png

Hope these solutions will help!

Yours respectfully,
Alex Vysotskiy

e-mail: me@AVysotskiy.com
Blog (english): http://AlexVysotskiy.com/
Blog (russian): http://AVisotskiy.com/

Please use Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you!
Active Contributor
magnolouis
Posts: 32
Registered: ‎06-21-2011
Message 3 of 4 (113 Views)

Re: Pressure Drop Tagging

01-22-2014 03:46 AM in reply to: me
Thanks Alex We done the same thing..
New Member
rajen_i2005
Posts: 2
Registered: ‎07-07-2014
Message 4 of 4 (42 Views)

Re: Pressure Drop Tagging

07-20-2014 09:19 PM in reply to: magnolouis

Hi,

I need one more advancement in this above topic.

is it possible to show critical path and the pressure drop values for that critical path sections.

highlighting the critical path

 

Thank you,

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.