Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I would like to know if it is possible create the Material takeoff of a wall showing the various layers of which it is composed. I want to say: I have the wall "Exterior1" which consists of layers A, B, and C. Can I see the thickness, area, etc of the various layers individually and of the entire wall?
I have not found answers in previous posts I hope someone can help me. Thanks so much.
I have another problem out of this topic.When I would size the pipes I do not get the "duct / pipe sizing" button.
For the ducts instead is present when I click on a duct.Why?
I just installed the patch for revit in Italian. This problem is only present in Italian versions of Revit. If I open Revit in English I do not have this problem.
To take the quantity of the wall layers you have to select New Material Takeoff from the Schedules/Quantities. Than you may have a takeoff like the snaphot attached. Hope this is what you are looking for.
Daniel Kazado
Please use Accept as Solution if your question is answered. You may Give Kudos if the answer is helpful.
