Revit MEP

Reply
Active Member
DENISERICKMAN70
Posts: 7
Registered: ‎03-26-2012
Message 1 of 6 (355 Views)

Looking for Steel Sch 40 pipe fittings

355 Views, 5 Replies
10-11-2013 12:36 PM

Does any one know where to find steel sch 40 pipe fittings? or an eazy why to make them...It is so strange there is steel sch 40 piping but no fittings to go with it. i have looked on the internet for 3 hours now, and no hope..."Please help if you can..

*Expert Elite*
CADastrophe
Posts: 3,336
Registered: ‎08-28-2009
Message 2 of 6 (313 Views)

Re: Looking for Steel Sch 40 pipe fittings

10-14-2013 06:03 AM in reply to: DENISERICKMAN70

Have you tried searching Autodesk Seek or on a manufacturer's website? Many manufacturer's have Revit Families free for download.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Active Member
DENISERICKMAN70
Posts: 7
Registered: ‎03-26-2012
Message 3 of 6 (307 Views)

Re: Looking for Steel Sch 40 pipe fittings

10-14-2013 06:15 AM in reply to: CADastrophe

i have looked on the internet for 3 hours now, and no hope.. That means that no manufacture has it avabile and I found one on AutoSeek and it did not work right.....

*Expert Elite*
CADastrophe
Posts: 3,336
Registered: ‎08-28-2009
Message 4 of 6 (300 Views)

Re: Looking for Steel Sch 40 pipe fittings

10-14-2013 06:36 AM in reply to: DENISERICKMAN70

You will have to create them, then. Search YouTube to see if you can find some tutorials or guides for creating Pipe Fitting Families. If you run into any specific issues, you can post here for help but I myself will likely be of limited assistance as I am primarily of the electrical discipline.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Mentor
gh_ar
Posts: 345
Registered: ‎08-05-2012
Message 5 of 6 (292 Views)

Re: Looking for Steel Sch 40 pipe fittings

10-14-2013 07:40 AM in reply to: DENISERICKMAN70
Product Support
Chris.Aquino
Posts: 400
Registered: ‎06-27-2010
Message 6 of 6 (274 Views)

Re: Looking for Steel Sch 40 pipe fittings

10-14-2013 08:38 AM in reply to: DENISERICKMAN70
If you cannot find what you are looking from the manufacturers, I would review the Revit MEP Families Guide which has steps for creating some families.

http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=13376617


Chris Aquino
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.


The Revit Clinic
@Revitclinic
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.