Revit MEP

Reply
Distinguished Contributor
spm5
Posts: 149
Registered: ‎03-30-2006
Message 1 of 3 (174 Views)

Linked Room Tags

174 Views, 2 Replies
10-24-2012 08:38 AM

I have an architectural model (with rooms placed and tagged) (revit 2012).

I link this model into my project, but I can not tag the rooms.

When I turn on room fill nothing shows up.

Any idea what the issue may be?

*Expert Elite*
CADastrophe
Posts: 3,214
Registered: ‎08-28-2009
Message 2 of 3 (171 Views)

Re: Linked Room Tags

10-24-2012 08:51 AM in reply to: spm5

Two possibilities:

 

1. The Rooms Category is turned off in V/G Overrides. Also check to make sure the Link's V/G's are not overridden under the Links tab.

 

2. The Cut Plane, under View Range, may be set to 0' - 0". If the Cut Plan does not cut through a Room, that Room will not be visible.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Distinguished Contributor
spm5
Posts: 149
Registered: ‎03-30-2006
Message 3 of 3 (169 Views)

Re: Linked Room Tags

10-24-2012 08:52 AM in reply to: CADastrophe

It was a stupid mistake. The phases were not mapped properly.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.