Revit MEP

Reply
New Member
michelle.blush
Posts: 1
Registered: ‎12-02-2013
Message 1 of 2 (145 Views)
Accepted Solution

linked panelboards in Revit

145 Views, 1 Replies
12-02-2013 10:02 AM

Can you circuit to a panelboard if it is in a linked model?

Hi Michelle, welcome to the Discussion Groups!

 

Unfortunately, no. You cannot circuit or otherwise connect systems with elements in a linked model. This also means that you cannot circuit elements (i.e. motors in a separate mechanical model) that reside in a linked model to a panel in the current model.

*Expert Elite*
CADastrophe
Posts: 3,335
Registered: ‎08-28-2009
Message 2 of 2 (129 Views)

Re: linked panelboards in Revit

12-02-2013 12:14 PM in reply to: michelle.blush

Hi Michelle, welcome to the Discussion Groups!

 

Unfortunately, no. You cannot circuit or otherwise connect systems with elements in a linked model. This also means that you cannot circuit elements (i.e. motors in a separate mechanical model) that reside in a linked model to a panel in the current model.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.