Revit MEP

Reply
Valued Mentor
gh_ar
Posts: 340
Registered: ‎08-05-2012
Message 1 of 3 (120 Views)
Accepted Solution

Lighting Equipment Error

120 Views, 2 Replies
11-13-2013 08:31 AM

 

 

hi all

 

When adding a light system warns Lighting Equipment.


How I solve?


What parameters should I modify?

 

Lighting Equipment Error.jpg

 

 

Lighting Equipment Error-2.jpg

 

 

 

Lighting Equipment Error-3.jpg

 

 

Your Panel is just not assigned to a Distribution System. Select your Panel and a pull-down will appear on the Options Bar (just below the Ribbon) which will allow you to select a valid Distribution System based on the data of the Primary Electrical Connector of the Panel. By default, newly placed Electrical Equipment is not assigned to a Distribution System, so this must be done manually.

*Expert Elite*
CADastrophe
Posts: 3,305
Registered: ‎08-28-2009
Message 2 of 3 (115 Views)

Re: Lighting Equipment Error

11-13-2013 08:37 AM in reply to: gh_ar

Your Panel is just not assigned to a Distribution System. Select your Panel and a pull-down will appear on the Options Bar (just below the Ribbon) which will allow you to select a valid Distribution System based on the data of the Primary Electrical Connector of the Panel. By default, newly placed Electrical Equipment is not assigned to a Distribution System, so this must be done manually.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Mentor
gh_ar
Posts: 340
Registered: ‎08-05-2012
Message 3 of 3 (108 Views)

Re: Lighting Equipment Error

11-13-2013 08:50 AM in reply to: CADastrophe

Thank you CADastrophe.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.