Revit MEP

New Member
Posts: 2
Registered: ‎12-12-2011
Message 1 of 3 (248 Views)
Accepted Solution

Issue with conduit runs and schedules

248 Views, 2 Replies
01-08-2014 06:55 AM

I am having an issue with conduit runs and schedules.  If I create a conduit run, then select the each object in the run and use the "Change Type" icon from the Edit panel of the Modify tab and change the selected conduit run type to a different type, the revised conduit run will not appear in a conduit run schedule.  I am having this issue in 2013 and 2014.  Is this a glitch in Revit or am I missing something?  Thanks for your help.

*Expert Elite*
Posts: 3,233
Registered: ‎08-28-2009
Message 2 of 3 (227 Views)

Re: Issue with conduit runs and schedules

01-08-2014 12:18 PM in reply to: mike

Hi Mike, welcome to the Discussion Groups!


I'm not sure if that is a bug or what. Also, instance parameters (such as Comments) get reset and the data erased. I was able to get the Conduit Run to reappear in the Conduit Run Schedule by selecting a single segment of Conduit (after using the Change Type command), changing the segment's Type via Type Selector to anything else, and then changing it right back again.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
New Member
Posts: 2
Registered: ‎12-12-2011
Message 3 of 3 (222 Views)

Re: Issue with conduit runs and schedules

01-08-2014 12:30 PM in reply to: CADastrophe



Great tip.  Your suggested work around takes care of the immediate need.  I sure appreciate your help.  Thanks!



Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.