Revit MEP

Reply
Contributor
sailaini_415
Posts: 22
Registered: ‎10-21-2013
Message 1 of 5 (190 Views)
Accepted Solution

Intereference error

190 Views, 4 Replies
11-19-2013 01:48 AM

Hi, i got this problem when i checked error using interference check. There was a report about air terminal which was shown on the attachment. I put this return grille by " place on face" in the 3D view. Did i put it with a right method? Can anyone help me to solve this error?

Check in your library under:

US Imperial\Mechanical\MEP\Air-Side Components\Air Terminals

and look for "Supply Diffuser - Sidewall". That family should work the way you want. If you're in 2014, there's an option when you're placing the diffuser to mount on the duct.
*Expert Elite*
abulla
Posts: 353
Registered: ‎10-14-2008
Message 2 of 5 (166 Views)

Re: Intereference error

11-19-2013 07:01 AM in reply to: sailaini_415
What version of Revit are you running? In 2014, there's an option to mount air terminals on duct. If you're in a previous release, I can see why Revit thinks that would be a clash. Duct-mounted diffusers have to be exaggerated in order to fit a takeoff and a small section of duct, then the diffuser.
Contributor
sailaini_415
Posts: 22
Registered: ‎10-21-2013
Message 3 of 5 (138 Views)

Re: Intereference error

11-19-2013 06:45 PM in reply to: abulla
I only have floor mounted and ceiling mounted diffuser. And I couldn't find duct mounted to download...
*Expert Elite*
abulla
Posts: 353
Registered: ‎10-14-2008
Message 4 of 5 (121 Views)

Re: Intereference error

11-20-2013 07:08 AM in reply to: sailaini_415
Check in your library under:

US Imperial\Mechanical\MEP\Air-Side Components\Air Terminals

and look for "Supply Diffuser - Sidewall". That family should work the way you want. If you're in 2014, there's an option when you're placing the diffuser to mount on the duct.
Contributor
sailaini_415
Posts: 22
Registered: ‎10-21-2013
Message 5 of 5 (108 Views)

Re: Intereference error

11-20-2013 10:40 PM in reply to: abulla
ok, thx a lot!
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.