Revit MEP

Reply
New Member
engineer12ahmed
Posts: 2
Registered: ‎10-28-2012
Message 1 of 2 (290 Views)
Accepted Solution

How can i convert Revit to AutoCad with same Colours

290 Views, 1 Replies
10-28-2012 04:12 PM

How can i convert Revit to AutoCad with same Colours

While you are in the DWG Export dialog selecting views/sheets, click on the "Browse.JPG" button beside the pull-down under "Select Export Setup".

 

You'll have to create an Export Setup here to get a custom configuration, in which you can assign layer names and colors as desired. Beware, there are a number of limitations, such as element Phasing for example.

*Expert Elite*
CADastrophe
Posts: 3,330
Registered: ‎08-28-2009
Message 2 of 2 (260 Views)

Re: How can i convert Revit to AutoCad with same Colours

10-29-2012 07:34 AM in reply to: engineer12ahmed

While you are in the DWG Export dialog selecting views/sheets, click on the "Browse.JPG" button beside the pull-down under "Select Export Setup".

 

You'll have to create an Export Setup here to get a custom configuration, in which you can assign layer names and colors as desired. Beware, there are a number of limitations, such as element Phasing for example.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.