Revit MEP

Reply
Active Member
septembersmile
Posts: 7
Registered: ‎04-07-2011
Message 1 of 3 (198 Views)
Accepted Solution

filter & control the Archi Revit Reference catagoies

198 Views, 2 Replies
11-25-2012 09:13 PM

Hi. Everyboday .. Good day to u :smileyhappy:

 

Please help me to give advice how to filter & control the Archi Revit Reference catagoies ..(for example .. I want to be off the Demolish Categories .)

 

Many Thanks ,

Smile

In order to control the appearance and visibility of the Categories belonging to a linked model separate from your model's settings, go to Visibility/Graphics Overrides » Revit Links. Under Display Settings for the link(s), click on the button which will read either "By Host View" or "Custom". This will take you to another dialog titled "RVT Link Display Settings" which appears just like V/G. In the first tab, set the top option to "Custom" and then you can go to the other tabs (set the pull-down at the top to read "Custom") and set the visibility as desired.

*Expert Elite*
CADastrophe
Posts: 3,285
Registered: ‎08-28-2009
Message 2 of 3 (184 Views)

Re: filter & control the Archi Revit Reference catagoies

11-26-2012 05:16 AM in reply to: septembersmile

In order to control the appearance and visibility of the Categories belonging to a linked model separate from your model's settings, go to Visibility/Graphics Overrides » Revit Links. Under Display Settings for the link(s), click on the button which will read either "By Host View" or "Custom". This will take you to another dialog titled "RVT Link Display Settings" which appears just like V/G. In the first tab, set the top option to "Custom" and then you can go to the other tabs (set the pull-down at the top to read "Custom") and set the visibility as desired.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Active Member
septembersmile
Posts: 7
Registered: ‎04-07-2011
Message 3 of 3 (180 Views)

Re: filter & control the Archi Revit Reference catagoies

11-26-2012 06:29 AM in reply to: CADastrophe

Thank You Very Much for your Reply ::smileyhappy:

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.