Revit MEP

Reply
pem
New Member
pem
Posts: 1
Registered: ‎11-29-2011
Message 1 of 1 (105 Views)

Families becoming unassociated and moving in the Model

105 Views, 0 Replies
11-29-2011 10:54 AM

I am using Revit MEP 2012. The Architect decided to redefine wall types,now when I link the Architectural File after each update I have some items unhosted or orphaned but I also have families that become unassociated and move to  different elevations and locations. It is really random and happens to all my familes. The last update the families on one wall rotated 90 degrees and so I had electric outlets, switches, clocks and data outlets at 240 feet above finished floor. I also had some that it looks almost as if they were mirrored along the wall but ended up out side the model and became unassociated. The thing is after this happens it is a nightmare to locate these small items like outlets that are all over the place. I get things back and it happens again but on different walls and even in different buildings in different models that are part of the same project. Is there anyone who can help me as to what is going on and how to reduce this problem to a managable level possibly.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.