Revit MEP

Reply
Valued Contributor
bvm76
Posts: 92
Registered: ‎09-10-2013
Message 1 of 3 (208 Views)
Accepted Solution

Elevation Difference

208 Views, 2 Replies
10-03-2013 02:18 AM

What makes the elevation of a link Revit model different from the elevation of the host drawing? Please see attached.

Both are set to project base point.

I linked the revit file using center-center but when I change to origin-origin this solved the issue.
New Member
jdiala
Posts: 1
Registered: ‎10-03-2013
Message 2 of 3 (145 Views)

Re: Elevation Difference

10-03-2013 10:42 PM in reply to: bvm76

It's probably you have your level set to survey point and the link model is set to project base point or vice versa.

I don't currently have a revit machine right now so instruction may be a little bit off.

 

1. Click on the level and open the properties dialog box. 

2. On the property dialog box click "Edit Type".

3. Constraints-> Elevation Base -> Change Project Base Point to Survey Point or vice versa.

 

 

Valued Contributor
bvm76
Posts: 92
Registered: ‎09-10-2013
Message 3 of 3 (123 Views)

Re: Elevation Difference

10-04-2013 12:38 PM in reply to: jdiala
Both are set to project base point.

I linked the revit file using center-center but when I change to origin-origin this solved the issue.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!