Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Duct not Auto Sizing when using the "Draw Duct" option

1 REPLY 1
Reply
Message 1 of 2
klubeley
365 Views, 1 Reply

Duct not Auto Sizing when using the "Draw Duct" option

When I right click on the connector of an element and select the "Draw Duct" option, The duct is not auto sizing to connector on the element. Is there a setting that controls this that I need to change? Some modifications were recently made to my .ini file by our HelpDesk. Is there something they could have changed that would cause this?

Tags (3)
1 REPLY 1
Message 2 of 2
gagnong
in reply to: klubeley

Check to see if Inherit Size is selected in the ribbon.  Or you can press the space bar after you select to draw duct.  This forces the new duct to inherit the size and elevation.



Greg Gagnon

Sr. Quality Assurance Analyst

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report