Revit MEP

Reply
Active Member
dworakma
Posts: 10
Registered: ‎12-02-2004
Message 1 of 3 (226 Views)
Accepted Solution

Copy/Monitor - Type Mapping Tracking flows

226 Views, 2 Replies
09-26-2012 10:45 AM

Working on a project where another firm is modeling the fan coil units and we're hooking up the piping.  I was hoping I'd be able to copy/monitor each piece using the "type mapping" behavior.  However, it doesn’t seem to pick up on a change of flow (i.e. 5 GPM to 10 GPM) using the coordination review.

 

Am I too hopeful?

 

Thanks in advance.

I believe that you are, unfortunately. Copy/Monitor simply creates a copy of the element and creates an association, but does not convey any of the design information from the linked project. Some of the Parameter Values will be translated when the Copy/Monitor first occurs, but if changed in the Linked Project, it won't translate those updated values on to your elements.

 

You can Tag the elements through the Linked Project or Schedule them to get a current reading on their values to compare to yours.

*Expert Elite*
CADastrophe
Posts: 3,286
Registered: ‎08-28-2009
Message 2 of 3 (225 Views)

Re: Copy/Monitor - Type Mapping Tracking flows

09-26-2012 10:55 AM in reply to: dworakma

I believe that you are, unfortunately. Copy/Monitor simply creates a copy of the element and creates an association, but does not convey any of the design information from the linked project. Some of the Parameter Values will be translated when the Copy/Monitor first occurs, but if changed in the Linked Project, it won't translate those updated values on to your elements.

 

You can Tag the elements through the Linked Project or Schedule them to get a current reading on their values to compare to yours.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Mentor
julianjameson8403
Posts: 458
Registered: ‎06-16-2010
Message 3 of 3 (214 Views)

Re: Copy/Monitor - Type Mapping Tracking flows

09-26-2012 12:39 PM in reply to: dworakma

Try a Mechanical Equipment Schedule showing your equipmennt and the equipment in the linked model shown with relevant parameters displayed

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.