Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
2008 NEC 210.4 (B) Multiwire Branch Circuits and 2 or 3 pole CBs
2008 NEC 210.4 (B) Multiwire Branch Circuits and 2 or 3 pole CBs
2008 NEC 210.4 (B) (and later I think) require multiwire branch circuits (circuits that share a neutral) to be fed from multiple pole circuit breakers. So a 3 circuit homerun feeding receptacles with a shared neutral require a 3 pole breaker at the panel. How is this accomplished in Revit? Workaround: dedicated neutrals. Thanks.
