Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I'm know this has been brought up before, but I want to add my vote: The panel schedules need serious help:
1. You need to be able to resize them easily. 2 panels per 30"x42" sheet is unacceptable.
2. There should be a way to force multi-circuit home runs together to adjacent breakers. Besides being good practice, as more jurisdictions adopt NEC 2008 we will be required to tie circuits with common neutrals together with either handle ties or multi-pole breakers.
I would also like to add that it would be nice on multi-circuit homeruns to be able to control the homerun arrows. It seems to be that every circuit has a homerun arrow, so for three circuits three homerun arrows will show.
I would like to be able to just show one homerun arrow as opposed to having to show all three.
I would also add that having more customization available for the panel schedules is an absolute must as well.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")