Revit MEP Wishes

Reply
Contributor
sparkie001
Posts: 23
Registered: ‎02-07-2007
Message 1 of 3 (444 Views)

A/B Light fixture switching

444 Views, 2 Replies
08-08-2007 08:14 PM
The California Energy Code requires A/B switching in rooms over 100 square ft. in area, so this is a very common wiring scenario that Revit lacks! This is usually done within each light fixture. For example, a 3 lamp fixture will have the two outer lamps on switch 'a' and the center lamp on switch 'b'. This allows for uniform reduction in light level in the room and is missing from Revit MEP. In the case of 2 lamp fixtures, the switching pattern in the room is usually by alternating fixtures.

We need the ability to connect two switches to a light fixture. I guess we can just fake it for now but there has to be a large demand out there for this and I can't believe it is missing!
Active Member
nickhank
Posts: 6
Registered: ‎07-16-2009
Message 2 of 3 (444 Views)

Re: A/B Light fixture switching

01-08-2010 11:20 AM in reply to: sparkie001
Same problem.

Any work-around?

Thanks,
Nick
Distinguished Contributor
thewrz
Posts: 171
Registered: ‎06-08-2009
Message 3 of 3 (409 Views)

Re: A/B Light fixture switching

02-29-2012 06:16 PM in reply to: sparkie001

Bump :smileyhappy:

____________________________________________________
Please give kudos to the MEP Wish List ideas you like, as this will help the Revit development team prioritize functionality additions!
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.