Revit Architecture

Active Member
Posts: 8
Registered: ‎10-16-2012
Message 1 of 2 (244 Views)

Yellow void wont dissapear problem

244 Views, 1 Replies
11-07-2012 05:49 AM



I am having problems with void that i cant hide in my project. The void is inside my generic family but wont apply a cut unless i apply a length parameter to it.  The problem i that in my project it seems to be visible as a yellow box that will also appear when printed.


Is in possible to hide this in the project by any way?

*Expert Elite*
Posts: 2,821
Registered: ‎06-11-2009
Message 2 of 2 (218 Views)

Re: Yellow void wont disappear problem

11-08-2012 04:58 AM in reply to: sigurjon81

That is unusual. Normally, the void is not visible. But, of course, we don't know the specific details about how that family was made. Open the family. Voids do not have a yes/no visibility parameter, but they do have Visibility Settings. Try to uncheck all the options, except the "fine" detail level; reload, and see if that helps.

Planta1 Revit Online Consulting | | my Twitter | The Planta1 Blog
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.