Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am having problems with void that i cant hide in my project. The void is inside my generic family but wont apply a cut unless i apply a length parameter to it. The problem i that in my project it seems to be visible as a yellow box that will also appear when printed.
Is in possible to hide this in the project by any way?
That is unusual. Normally, the void is not visible. But, of course, we don't know the specific details about how that family was made. Open the family. Voids do not have a yes/no visibility parameter, but they do have Visibility Settings. Try to uncheck all the options, except the "fine" detail level; reload, and see if that helps.
Alfredo Medina _________________________________________________________________ ______ Licensed Architect (Florida) | Freelance Instructor | Autodesk Expert Elite (on Revit) | Profile on Linkedin
