Revit Architecture

Reply
Active Member
rsabclin
Posts: 6
Registered: ‎07-11-2007
Message 1 of 3 (287 Views)
Accepted Solution

Wrap base at end wall

287 Views, 2 Replies
12-12-2013 07:41 PM

I added base to wall in sweep and I change to interior or exterior in Wrapping at Ends. It does not show any base at end wall. Did I miss anything? How I can make it work? 

 

Thanks

Richard

Try this:

  1. In a 3d view click on  sweep profile and then from Modify / Walls > Wall Sweep > Modify Returns > click once on the end of the sweep (Angle to be 90 degrees or any angle you want)- the sweep will turn perpendicular to the wall art wall's end
  2. using TAB click on the face of the section profile and drag it to the desired position. You can use Align in order to align the end of the sweep to the otehr face of the wall

Image 3.png

Image 4.png

 

Image 5.png

*Expert Elite*
constantin.stroescu
Posts: 1,084
Registered: ‎10-29-2008
Message 2 of 3 (265 Views)

Re: Wrap base at end wall

12-13-2013 12:33 AM in reply to: rsabclin

Try this:

  1. In a 3d view click on  sweep profile and then from Modify / Walls > Wall Sweep > Modify Returns > click once on the end of the sweep (Angle to be 90 degrees or any angle you want)- the sweep will turn perpendicular to the wall art wall's end
  2. using TAB click on the face of the section profile and drag it to the desired position. You can use Align in order to align the end of the sweep to the otehr face of the wall

Image 3.png

Image 4.png

 

Image 5.png

Constantin Stroescu
BIM Manager AGD
Active Member
rsabclin
Posts: 6
Registered: ‎07-11-2007
Message 3 of 3 (247 Views)

Re: Wrap base at end wall

12-13-2013 06:54 AM in reply to: constantin.stroescu

It works! I guess that it won't automaticlly apply to all walls and I have to do it one by one at end walls. Thanks.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!