Revit Architecture

Reply
Active Contributor
paul53_7
Posts: 48
Registered: ‎03-20-2012
Message 1 of 3 (137 Views)

Window Family Problems

137 Views, 2 Replies
11-12-2012 02:46 AM

Hi,

 

Please see attached Revit File

 

I am creating a window, i have inserted a few parameters width , height etc. But when i try and change these widths and heights my upper frame does not move with it. See file for better explaination.

 

Any help would be appreciated.

 

Thanks,

Contributor
nddesign
Posts: 23
Registered: ‎09-09-2004
Message 2 of 3 (126 Views)

Re: Window Family Problems

11-12-2012 12:41 PM in reply to: paul53_7

In general - get it working with flexing of the reference plane before you worry about the geometry.  Put in reference plane and place only one dimension string to control it. (dont put in multiple dimensions in multiple views to the same plane.   Assign a parameter to control the dimension.  Flex it to ensure the reference plane moves when you change the parameter (maybe have 2 family types for testing/flexing).   Lock geometry to the reference planes and not to other geometry. Good luck.

Active Contributor
paul53_7
Posts: 48
Registered: ‎03-20-2012
Message 3 of 3 (93 Views)

Re: Window Family Problems

11-13-2012 12:18 AM in reply to: nddesign

Would you have any examples you could show me?

 

Still abit new to creating families.

 

Thanks.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.