Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Wall end (void sweep): Can't cut instance out of Wall
Wall end (void sweep): Can't cut instance out of Wall
I have the following problem: I've made an angled wall end tool (generic model family with a void sweep) with an angle parameter. When I place it at the end of a curved wall, and set an angle more than 70 (for example 75 degrees), I get the error message "Can't cut instance out of Wall". With angles 70 or less, or when the component is not at the end of the wall (or is actually even closer to the wall end), the void is cut just fine. A screen shot and the family file are attached...
