On 5/27/2010 7:48 AM, cdv wrote:
> Go to the elevation that shows the side of masonry wall, click on the wall
> then in the ribbon click edit profile, once in edit mode draw a line at the
> same angle of the curtain wall, trim/extend the upper and lower lines to the
> newly created line, erase the vertical line representing the old wall edge
> and you are done .
>
will that work if the face plane of the curtain wall is curved? You
wouldn't be able to use a line for the trim/extend...
--
Dave - DDP
Acad 2011 and Revit 2011
Win 7 Pro 64 bit
Intel I7-860 @2.8GHz
12GB DDR3 RAM
GeForce GTX260