Revit Architecture

Reply
Distinguished Contributor
alex60
Posts: 115
Registered: ‎07-09-2011
Message 1 of 5 (447 Views)

Viewport extensions

447 Views, 4 Replies
09-15-2011 10:19 AM

Hi every one, I am using Revit 2012 and am having an issue with the viewport on a sheet. When I hover the viewport I can see a border that is not the viewport extensions in the view.  I tried to reduce the crop view and the annotation crop but it doesn't affect the border in the sheet. Does any one know how to reduce this border? See the attached image.

 

Thanks in advance.

Contributor
jim5552
Posts: 16
Registered: ‎07-28-2011
Message 2 of 5 (431 Views)

Re: Viewport extensions

09-15-2011 11:50 AM in reply to: alex60

I think the size of your view port is determined by the reference plane in your view. Play with the length of the reference plane and see if that does anything to your view port size.

Distinguished Contributor
alex60
Posts: 115
Registered: ‎07-09-2011
Message 3 of 5 (401 Views)

Re: Viewport extensions

09-16-2011 06:10 AM in reply to: alex60

Hi, there is no any reference plane in my drawing. It is a callout to make a detail, so I don't have any reference plane.

 

Thnaks, Alex

Active Contributor
mike
Posts: 28
Registered: ‎06-05-2008
Message 4 of 5 (364 Views)

Re: Viewport extensions

09-19-2011 01:57 PM in reply to: alex60

I think the previous answer was refering to the horizontal dashed green line.  This looks like a reference plane or reference line, which will affect the viewport size.

Cheers.

Distinguished Contributor
alex60
Posts: 115
Registered: ‎07-09-2011
Message 5 of 5 (327 Views)

Re: Viewport extensions

09-22-2011 11:14 AM in reply to: mike

Thank you very much, it worked.

 

Alex

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.