Revit Architecture

Revit Architecture

Reply
New Member
h.o_connor
Posts: 2
Registered: ‎10-04-2013
Message 1 of 2 (123 Views)

UPGRADING WALLS IN DIFFERENT PHASES

123 Views, 1 Replies
11-27-2013 11:04 AM

Hi 

 

i have an existing building in  the existing phase on revit 2014. i'm wondering if i can upgrade the wall in the newconstruction phase. eg existing is a block wall and i want to add insulation to it in new construction. is there a way of doing this without deleting the existing wall? 

 

Thanks hugh

*Expert Elite*
constantin.stroescu
Posts: 992
Registered: ‎10-29-2008
Message 2 of 2 (108 Views)

Re: UPGRADING WALLS IN DIFFERENT PHASES

11-27-2013 12:39 PM in reply to: h.o_connor

In this situation I 'll try  to make two walls :

  1. first create a wall of blocks and place it in  Phase Existing: select the Wall > Properties> Phasing > Phase Created >Existing
  2. Create a second wall with one or more layer of  insulation aligned and lock with the interior face to the exterior face of the existing wall from 1,  and place it in Phase  New Construction
  3. The two walls appear in schedules

If , you have first to demolish some layers of the existing wall , I suggest making two walls for Existing ...one that for the preseved wall and one for the demolished ...the Phasing >Show All will show the existing, demolished and the new walls...

 

Image 347.png

Constantin Stroescu
BIM Manager AGD
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.