Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Units of Levels

1 REPLY 1
Reply
Message 1 of 2
Anonymous
327 Views, 1 Reply

Units of Levels

Could some please advise if it is possible to change the units for the
levels, as used for floor planes, shown in sections and elevations, etc.

Generally, we start a project with a survey and datum levels are 100.000
metres. with this in mind, most sites don't have negative numbers for
levels, which would add confusion to a project.

However, this takes the Revit levels at being 100000 which although correct,
is a bit of a mouth full. Ideally it would read 100.000m

Has anyone come across this problem ?

Also, wish everyone a relaxing family Christmas and best for 2010...
1 REPLY 1
Message 2 of 2
Alfredo_Medina
in reply to: Anonymous

Merry Christmas to you too.
First, if you want to see the dot (.) as the separator, specify that in Windows > Control panel > Regional options.
Then, in Revit, to display the separator, go into Manage > Project Units > select meters > check Use digit grouping.

Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Autodesk Expert Elite (on Revit) | Profile on Linkedin

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report