undo demolition

[jreyhons]

I demolished an existing door on my project that is now not getting demolished. How do I change it back to the existing phase? In the element properties the phase is grey and cannot be changed. Please help.
Thanks.

[Anonymous · Accepted solution]

If it is demolished it should be still listed as Phase Created - Existing
and phase Demolished as New Construction. The existing door should be
visible in an existing view. If you are trying to remove it from being
demolished you will have to select it then in properties change the Phase
Demolished setting to none and the Phase Created will remain as Existing.

"jreyhons" wrote in message news:6300588@discussion.autodesk.com...
> I demolished an existing door on my project that is now not getting
> demolished. How do I change it back to the existing phase? In the element
> properties the phase is grey and cannot be changed. Please help.
> Thanks.

[l_hassaninezhad]

I had the same problem,tanx

---

@Anonymous wrote:
If it is demolished it should be still listed as Phase Created - Existing
and phase Demolished as New Construction. The existing door should be
visible in an existing view. If you are trying to remove it from being
demolished you will have to select it then in properties change the Phase
Demolished setting to none and the Phase Created will remain as Existing.

"jreyhons" wrote in message news:6300588@discussion.autodesk.com...
> I demolished an existing door on my project that is now not getting
> demolished. How do I change it back to the existing phase? In the element
> properties the phase is grey and cannot be changed. Please help.
> Thanks.

---

[Corsten.Au]

Hi.
Your view might have a template which is not allowing you to change the phase of the view .
Simply go to some other view ( example 3d ) change the phase of that view to “ existing “
Select that element , and change the demolished phase to “ none “
Or just copy that element and paste it in existing phase and delete the old element..