Revit Architecture

Reply
Active Contributor
ssoonets
Posts: 31
Registered: ‎03-06-2003
Message 1 of 3 (192 Views)
Accepted Solution

TWO DIFFERENT TAGS FOR WINDOWS

192 Views, 2 Replies
07-21-2012 05:35 PM

Hi:

 

Is it possible to have two different tags for windows? In some I'd want to see the description, and in others only the mark. It seems that I can only load one tag for windows at the time?

 

Thank you!!!

 

Silvia

use the same tag with two Types in it.  One Type will show the Mark, and the other Type will show the description.  Place the tag, then switch it using the type selector.  You will have to edit the window tag to add the descriptor lable, and set up the visibility for the Types.

Employee
davissc
Posts: 298
Registered: ‎08-08-2007
Message 2 of 3 (175 Views)

Re: TWO DIFFERENT TAGS FOR WINDOWS

07-22-2012 09:16 AM in reply to: ssoonets

use the same tag with two Types in it.  One Type will show the Mark, and the other Type will show the description.  Place the tag, then switch it using the type selector.  You will have to edit the window tag to add the descriptor lable, and set up the visibility for the Types.



Scott D Davis
AEC Technical Specialist
North American Sales
Autodesk, Inc.

Want Revit Content? Go to http://seek.autodesk.com !

Active Contributor
ssoonets
Posts: 31
Registered: ‎03-06-2003
Message 3 of 3 (154 Views)

Re: TWO DIFFERENT TAGS FOR WINDOWS

07-23-2012 02:56 PM in reply to: davissc

Thank you!!!

 

It took a while to discover how to hide each label, but at the end I did it!!!


Silvia

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.