Revit Architecture

Valued Contributor
Posts: 84
Registered: ‎02-27-2010
Message 1 of 2 (195 Views)
Accepted Solution

Topography fill iun section

195 Views, 1 Replies
11-02-2012 02:26 AM

I'm having a bit of trouble.  I have a project that was setup using 2 linked files.  1 for the building and 1 for the site.  I'd decided to merge them into a single central file and I'v merged the site into my building model.


What I've found is that the topography fill no longer extends more than 3m below the project base point.  The cut line does just not the fill and I have a site whioch is sloping so I need that fill to extend down to the survey point.


Is there a setting or property I can change that adjusts this?




Russ Green settings>elevation of poche base


Valued Contributor
Posts: 84
Registered: ‎02-27-2010
Message 2 of 2 (192 Views)

Re: Topography fill iun section

11-02-2012 03:00 AM in reply to: settings>elevation of poche base


Russ Green
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.