Revit Architecture

Reply
Contributor
Tim Ulrich
Posts: 14
Registered: ‎12-16-2003
Message 1 of 3 (272 Views)

Toggle Mullion Join

272 Views, 2 Replies
03-08-2005 12:51 PM
When working with mullions, there is a "Toggle mullion join" at the end of each mullion and you have to pick each one individually to toggle. Is there any way to pick a group of mullions and have them all toggle at once?

Thanks
Tim Ulrich
Firmwide CAD Manager
HOK
New Member
ds.jason
Posts: 1
Registered: ‎10-02-2012
Message 2 of 3 (176 Views)

Re: Toggle Mullion Join

10-02-2012 07:11 AM in reply to: Tim Ulrich

**BUMP**

9 years later, still need a solution for this ...Anyone out there in Autodesk land care?

 

Doing this individually wastes hours of time on large projects

*Expert Elite*
Alfredo_Medina
Posts: 2,830
Registered: ‎06-11-2009
Message 3 of 3 (167 Views)

Re: Toggle Mullion Join

10-02-2012 08:42 AM in reply to: Tim Ulrich

Wow, what a bump! 9 years!

 

You cannot select multiple mullions to use the toggle, but you can prevent excessive future changes if you predefine the preferred joint condition in advance, in the curtain wall's type properties:

 

cw_join_condition.jpg

-----------------------------------------------------------------------------------------------------------------
Planta1 Revit Online Consulting | info@planta1.com | my Twitter | The Planta1 Blog
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.