Revit Architecture

Reply
Contributor
KarzanCM
Posts: 16
Registered: ‎02-18-2010
Message 1 of 5 (465 Views)
Accepted Solution

Stair Shape

465 Views, 4 Replies
07-13-2011 12:33 PM

Hello,

 

How can I extend Tread below the riser, I have attached a picture for explanation , the Autocad illustration is what I want, The Revit three D model is what I have, What Should I change to achieve the AutoCAD illustration.

 

Revit Stair.png

In the stair proerties dialogue box there is an option to "extend tread under riser" which may help.  Or could you set the riser thickness to be 0.18 ?

*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 2 of 5 (452 Views)

Re: Stair Shape

07-13-2011 12:42 PM in reply to: KarzanCM

You can change it to a "monolitic" stair to get that effect.

 

cheers

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Contributor
KarzanCM
Posts: 16
Registered: ‎02-18-2010
Message 3 of 5 (434 Views)

Re: Stair Shape

07-13-2011 09:06 PM in reply to: ccollins

Thanks for your reply, I already tried that, but I don't get that result. I get the same using underside of winder as smooth and stepped as well.

 thanks

Active Contributor
mike
Posts: 28
Registered: ‎06-05-2008
Message 4 of 5 (394 Views)

Re: Stair Shape

07-17-2011 02:25 PM in reply to: KarzanCM

In the stair proerties dialogue box there is an option to "extend tread under riser" which may help.  Or could you set the riser thickness to be 0.18 ?

Contributor
KarzanCM
Posts: 16
Registered: ‎02-18-2010
Message 5 of 5 (377 Views)

Re: Stair Shape

07-18-2011 05:03 AM in reply to: mike

Thanks Mike,

 

I set riser thickness to 0.18 and it worked , that is how I wanted it.

revit stair solved.png

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.