Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
What is the best way to set up a site plan for a single building?
I'm using civil consultant base plans that will be updated from time to time.
I want to be able to move my building around adjusting as needed.
Should I set it up like I would if I had multiple buildings, creating 2 files, one for the site plan and one for the building and reference them into each other or just create a single file? It seems difficult to move a building in a single file that includes the site plan.
Link in the DWG site plan from civil. Move the site plan around as needed
rather than moving the building. Then use Project Position/Orientation to
set plan and true north.
wrote in message news:4998544@discussion.autodesk.com...
What is the best way to set up a site plan for a single building?
I'm using civil consultant base plans that will be updated from time to
time.
I want to be able to move my building around adjusting as needed.
Should I set it up like I would if I had multiple buildings, creating 2
files, one for the site plan and one for the building and reference them
into each other or just create a single file? It seems difficult to move a
building in a single file that includes the site plan.
