Revit Architecture

Revit Architecture

Reply
Valued Mentor
jonmcfarlandWS
Posts: 267
Registered: ‎09-22-2010
Message 1 of 4 (768 Views)

Select multiple curtainwall panels

768 Views, 3 Replies
11-23-2010 05:53 AM

I have a curtainwall cut into hundreds of panels and I need to substitute each of these with 1 of a dozen or so custom panels.  Is there a way to select, say 30 panels from a curtainwall and then substitute one type from the properties panel, rather than substituting one at a time?

 

Thanks,

Jon

Jon

Please select "Accept as Solution" if your question was answered.
curtainwallBIM.blogspot.com
----------------------------------------------------------------------------------------------
Alumni
kathryn.langan
Posts: 467
Registered: ‎12-16-2008
Message 2 of 4 (739 Views)

Re: Select multiple curtainwall panels

11-24-2010 10:59 AM in reply to: jonmcfarlandWS

Hi John,

 

Are the panels adjacent to each other? If you use a cross selection window to select that portion of the wall, then use the Filter tool to filter out only the panels, you should be able to change them all at once.

 

Hope this helps!



Katie Langan
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.

Valued Mentor
jonmcfarlandWS
Posts: 267
Registered: ‎09-22-2010
Message 3 of 4 (735 Views)

Re: Select multiple curtainwall panels

11-24-2010 11:16 AM in reply to: kathryn.langan

Hi Katie,

 

<<Are the panels adjacent to each other? If you use a cross selection window to select that portion of the wall, then use the Filter tool to filter out only the panels, you should be able to change them all at once.>>

 

Unfortunately they're not  Attached is one elevation that is representative of many on the facility and it isn't common when two identical panels are even side by side.  Any other ideas?

 

Thanks,

 

Jon

Jon

Please select "Accept as Solution" if your question was answered.
curtainwallBIM.blogspot.com
----------------------------------------------------------------------------------------------
New Member
bogdan_nikolic
Posts: 1
Registered: ‎05-22-2013
Message 4 of 4 (177 Views)

Re: Select multiple curtainwall panels

05-29-2014 03:59 AM in reply to: jonmcfarlandWS
4 years later but this may be useful to someone:

to select multiple curtain panels, hide EVERYTHING in your view EXCEPT the curtain wall itself AND panels. hide even curtain wall grid (you cant hide the grid by category, but by element!)

happy selecting!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.