Revit Architecture

Reply
Active Member
sconrad77
Posts: 9
Registered: ‎07-19-2010
Message 1 of 3 (519 Views)
Accepted Solution

Section Callout Annotation

519 Views, 2 Replies
05-14-2012 03:12 PM

Where is the setting to tell the section line to begin?  This line is cutting through our callout annotation circle, which happens to be sized larger than Revit’s default. See picture attached. Thanks for any help you can give. - StaceySection.png

That fixed it.  The thing that tricked me, is that I had to turn on the reference planes and move the callout and the reference planes.  Thanks so much for the help. -Stacey

Mentor
parveen.revit
Posts: 232
Registered: ‎09-29-2010
Message 2 of 3 (509 Views)

Re: Section Callout Annotation

05-14-2012 08:25 PM in reply to: sconrad77

modify your callout annotation circle family and move it to other side.

Parveen_Intec_Infocom (BIM, CAD, GIS, QS Services' Provider)
Active Member
sconrad77
Posts: 9
Registered: ‎07-19-2010
Message 3 of 3 (498 Views)

Re: Section Callout Annotation

05-15-2012 06:19 AM in reply to: parveen.revit

That fixed it.  The thing that tricked me, is that I had to turn on the reference planes and move the callout and the reference planes.  Thanks so much for the help. -Stacey

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.