Revit Architecture

Reply
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 1 of 5 (613 Views)
Accepted Solution

Room Tag Issues

613 Views, 4 Replies
09-18-2012 07:18 AM

Hi

 

I'm having issues with positioning room tags.

 

When I try to position my prefered tag in some, mostly, small rooms I get an out of room error.

 

I assume this relates to an insertion point over which I have no apparent control which can be clearly seen, a green line, when trying to move the tag - see attached screen grab.

 

As I don't want to use a leader any suggestions or am I missing something obvious?

 

Regards

 

Christopher Alan Pitt

Frank Shaw Associates

The Reference Planes are already there. Most likely, Annotation Categories are turned off under Visibility/Graphics Overrides.

*Expert Elite*
CADastrophe
Posts: 3,421
Registered: ‎08-28-2009
Message 2 of 5 (607 Views)

Re: Room Tag Issues

09-18-2012 07:41 AM in reply to: chris.pitt

It appears that the Elements in the Family are not located on the origin point (intersection of the reference planes). You can open the Family for editing to correct this, but all of your existing Tags will be changed as well.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 3 of 5 (597 Views)

Re: Room Tag Issues

09-18-2012 08:41 AM in reply to: CADastrophe

Noted but the family editor doesn't give me the option for reference planes, only reference lines

 

Regards

 

Christopher Alan Pitt

Frank Shaw Associates

*Expert Elite*
CADastrophe
Posts: 3,421
Registered: ‎08-28-2009
Message 4 of 5 (592 Views)

Re: Room Tag Issues

09-18-2012 08:54 AM in reply to: chris.pitt

The Reference Planes are already there. Most likely, Annotation Categories are turned off under Visibility/Graphics Overrides.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Active Contributor
chris.pitt
Posts: 35
Registered: ‎06-29-2005
Message 5 of 5 (575 Views)

Re: Room Tag Issues

09-19-2012 12:33 AM in reply to: CADastrophe

Thank you!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.