Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Room tag help!!

1 REPLY 1
Reply
Message 1 of 2
d-guyatte
341 Views, 1 Reply

Room tag help!!

I am trying to make room tags on the second level of this project however if you look at the attached it is not piking up the interior partition walls as room boundaries even though the box is checked that they are room bounding. I do have open doors in some areas however when i changed them to a default door the same issue occurred. My cut plane is at 7' (pic is attached), And I've tried limit offsets of 7' - 12-8" my walls are only 12' in height. I don't know what else to do to get these tags correct. The annoying thing is that they are correct all on the first floor, its only the second floor that is giving me a hard time. PLEASE HELP this has been bugging me for 2 days now.

 

1 REPLY 1
Message 2 of 2

You can also try to verify :

  • Base Offset of the walls to be 0,00
  • and the Computation Height to be under the wall height value: In an Elevation or Section View click on the Line of the Second Floor > Properties > Dimensions > Computation Height  - it has to be at a value under the wall height value
Constantin Stroescu
BIM Manager AGD

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report