Hi,
I have a problem drawing a specific roof type. I have a glass box 5000x5000mm and need an angled roof so rainwater can run down on one side. I need the slope (15 degrees) to be on one side only, instead of in the middle of the roof. Therefore one glass wall would be 5000mm height, the one opposite would be slightly less, maybe 4800mm height and the other two panels would need to run with the sloped roof in terms of height. I hope that makes sense. I attached a screenshot of the front elevation and a 3D view of my glass box with a sloped glazing roof how revit suggests it and I also drew a roof mass how I need it to look like roughly.
Any help is greatly appreciated!