Roof flashing

[Anonymous]

Hey there,

i am searching a 3d detail as shown at the attached image. A 3d roof flashing for a flat roof (attica).

Has anybody a good family? The Metal only at the top would be enough!

Thank you so much!

[Anonymous]

Noboy an idea? How you create them?

[constantin.stroescu]

Try this:

• create a closed Profile Family  of the flashing and load it into the Project
• in Project > Architecture >Component > Model in Place > Generic Models -Name > Sweep - for Path > Pick Path (Pick 3 d Edges)- OK - then select Profile -select from the list the profile you have previously loaded...

[constantin.stroescu · Accepted solution]

here is a screencast on the subject:

https://screencast.autodesk.com/Main/Details/b47e0228-125a-4c97-b946-9891a897fcc1

and the Profile Family is in the attachement...

[Anonymous]

Perfect! Really good job, thank you so much!

[Anonymous]

But one question left: How get i a correct corner connection e.g. 90° ?

[constantin.stroescu]

??....the conection goes automatically...

have a look on the following screencast:

https://screencast.autodesk.com/Main/Details/c1ff9a75-2003-427c-95e1-793f773ed6ea

[Anonymous]

Oh man, i drawed every flashing itself 😛

Sorry for that 😉 Now it works! What a great job!!!!