Revit Architecture

Reply
New Member
2 Posts
0 Kudos
Registered: ‎12-16-2013
Post 1 of 4
Accepted Solution

Roof edge profile

645 Views, 3 Replies
01-20-2014 03:38 AM

I am new to Revit having previously used AutoCAD Architecture.

 

What I am trying to do is to model a roof using Revit Lt so that the roof tiling and battens carry on over the gable wall.

Is it possible to add a void profile to the roof slab in order to achieve this or do I need to model a small section of roof to just cover the wall portion?

 

 

Thanks for the work-around constantin.stroescu (Distinguished Mentor) - this
has solved the problem with the roof layers but is now giving a challenge
cutting the dormers through two layer of roof!

I am thinking that a horizontal shaft might be the way to go - would you
consider this be the best approach?





bgb

If you want to Cut everything I would recommend using a Void:

Component > Model in Place > Generic Models > Name it > make an Extrusion as you want to be the cutter - declare it Void ( from Properties > Identity Data) . Select the Void and from Geometry > Cut - select one by one the Void and first roof, the void and second roof the void and the wall. It will cut all the entities ( because the void was created as Generic Model)

 

Image 428.png

*Expert Elite*
1,152 Posts
331 Kudos
Registered: ‎10-29-2008
Post 2 of 4

Re: Roof edge profile

01-20-2014 09:49 AM in reply to: b-k-bourgaize

I'm not quit sure I understand you well...Is it this what you want ?

Image 420.png

 

If it is so , you can do it as follows:

  1. make the main roof by Footprint (using a roof type with more layers including that of the rafters+insulation)
  2. make a second roof by Extrusion (using a roof type similar to roof from 1 without the rafters+insulation layer) Roof by Extrusion > Work Plane > Pick a Plane - click on side of the first roof .... then :draw -> Pick Lines -click on uper edges of first roof > Finish Edit Mode
  3. Join the two roofs ( Geometry> Join)
  4. Attach the wall to second roof

Image 421.png

 

Image 422.png

Constantin Stroescu
BIM Manager AGD
New Member
2 Posts
0 Kudos
Registered: ‎12-16-2013
Post 3 of 4

Re: Roof edge profile

01-20-2014 01:50 PM in reply to: constantin.stroescu
Thanks for the work-around constantin.stroescu (Distinguished Mentor) - this
has solved the problem with the roof layers but is now giving a challenge
cutting the dormers through two layer of roof!

I am thinking that a horizontal shaft might be the way to go - would you
consider this be the best approach?





bgb
*Expert Elite*
1,152 Posts
331 Kudos
Registered: ‎10-29-2008
Post 4 of 4

Re: Roof edge profile

01-20-2014 02:20 PM in reply to: b-k-bourgaize

If you want to Cut everything I would recommend using a Void:

Component > Model in Place > Generic Models > Name it > make an Extrusion as you want to be the cutter - declare it Void ( from Properties > Identity Data) . Select the Void and from Geometry > Cut - select one by one the Void and first roof, the void and second roof the void and the wall. It will cut all the entities ( because the void was created as Generic Model)

 

Image 428.png

Constantin Stroescu
BIM Manager AGD
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!