Revit Architecture

Revit Architecture

Reply
*Damir
Message 1 of 4 (517 Views)

Revolving door as a curtain wall panel

517 Views, 3 Replies
05-22-2004 09:59 PM
Hi, I have a curtain wall and revolving doors inside it. Is it possible to make so complex curtain wall panel? I was trying to make this new family the whole day, but curtain wall rejects it. Please, give me some suggestions. Damir Crnila
*Scott Davis
Message 2 of 4 (517 Views)

Re: Revolving door as a curtain wall panel

05-23-2004 09:04 AM in reply to: *Damir
How did you 'start' to make your revolving door? I would probably opened an existing curtain wall door family, did a Saveas, and modified that to see if I could get it to work. Also, there is a revolving door family available at www.rugi.org but it's wall based. But you might be able to reverse engineer that one to see how to make your curtain panel version. Ultimately, send your attempted door to Revit support, and they will help you make it work. SD "Damir" wrote in message news:40b02e6d_2@newsprd01... > Hi, > I have a curtain wall and revolving doors inside it. Is it possible to make > so complex curtain wall panel? I was trying to make this new family the > whole day, but curtain wall rejects it. Please, give me some suggestions. > > Damir Crnila > >
*Leonid Raiz
Message 3 of 4 (517 Views)

Re: Revolving door as a curtain wall panel

05-23-2004 01:15 PM in reply to: *Damir
Make sure to set category of your family to Curtain Panels (use Settings | Family Category and Parameters dialog). "Scott Davis" wrote in message news:40b0cb2a_1@newsprd01... > How did you 'start' to make your revolving door? I would probably opened an > existing curtain wall door family, did a Saveas, and modified that to see if > I could get it to work. > > Also, there is a revolving door family available at www.rugi.org but it's > wall based. But you might be able to reverse engineer that one to see how > to make your curtain panel version. > > Ultimately, send your attempted door to Revit support, and they will help > you make it work. > > SD > > > "Damir" wrote in message news:40b02e6d_2@newsprd01... > > Hi, > > I have a curtain wall and revolving doors inside it. Is it possible to > make > > so complex curtain wall panel? I was trying to make this new family the > > whole day, but curtain wall rejects it. Please, give me some suggestions. > > > > Damir Crnila > > > > > >
*Damir
Message 4 of 4 (517 Views)

Re: Revolving door as a curtain wall panel

05-24-2004 09:36 PM in reply to: *Damir
That's exactly what I did. I tried to make the same revolving door as it comes with Revit library inside panel family. Then I started deleting my door elements to see what curtain wall accepts. Almost nothing left. Problems are mostly in curved extrusions. Damir "Scott Davis" wrote in message news:40b0cb2a_1@newsprd01... > How did you 'start' to make your revolving door? I would probably opened an > existing curtain wall door family, did a Saveas, and modified that to see if > I could get it to work. > > Also, there is a revolving door family available at www.rugi.org but it's > wall based. But you might be able to reverse engineer that one to see how > to make your curtain panel version. > > Ultimately, send your attempted door to Revit support, and they will help > you make it work. > > SD > > > "Damir" wrote in message news:40b02e6d_2@newsprd01... > > Hi, > > I have a curtain wall and revolving doors inside it. Is it possible to > make > > so complex curtain wall panel? I was trying to make this new family the > > whole day, but curtain wall rejects it. Please, give me some suggestions. > > > > Damir Crnila > > > > > >
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.