Revit Architecture

Revit Architecture

Reply
Member
helpdesk
Posts: 3
Registered: ‎01-28-2012
Message 1 of 4 (311 Views)

Revit Local Server administration page is dispalying.

311 Views, 3 Replies
09-15-2012 01:05 AM

We have 1 Revit Central Server and 5 Local Revit Server, Revit Central Server Administration page can open and we work. But all 5 Revit Local Server administration page is working and showing Revit Server is not available please check with administator or try again. It seems we need to check some access rights authontication and Autorization Rules in Revit Central server.  Any one can give hints to fix this problem. error file is attached

Product Support
alan.quinn
Posts: 631
Registered: ‎09-08-2010
Message 2 of 4 (279 Views)

Re: Revit Local Server administration page is displaying.

09-18-2012 09:04 AM in reply to: helpdesk

Sounds like you need to set up your RSN.ini file. However, make sure you review and follow all instruction in the following link.

 

http://wikihelp.autodesk.com/Revit/enu/Community/Links_and_Resources/Revit_Server_2013_Reference

 

You may need to start over on one of your locals to insure that you have everything installed correctly.

 

Thanks for posting.



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Member
helpdesk
Posts: 3
Registered: ‎01-28-2012
Message 3 of 4 (264 Views)

Re: Revit Local Server administration page is dispalying.

09-18-2012 11:24 PM in reply to: helpdesk

Thanks for support.  Just I want to inform you that I am using Revit Server 2012, and administrator console is not working. When I log to Admin Console this message is  Revit Server is not available, please contact with administrator or try again later. It seems we need to configure in Revit Central Server IIS setting. Attached error file

Product Support
alan.quinn
Posts: 631
Registered: ‎09-08-2010
Message 4 of 4 (244 Views)

Re: Revit Local Server administration page is displaying.

09-20-2012 06:21 AM in reply to: helpdesk

I'm assuming that this never works and if this is the case I would look at your setup to insure everything is in place. Please see the below link for more information.

 

Revit Server Administrator

 

http://wikihelp.autodesk.com/Revit/enu/2012/Help/Revit_Administration_Guide/0002-Revit_Se2/0008-Revi...

 

Revit Server Troubleshooting

 

http://wikihelp.autodesk.com/Revit/enu/2012/Help/Revit_Administration_Guide/0002-Revit_Se2/Revit_Ser...

 

Hope this helps and thank you.



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.