Revit Architecture

Reply
*Stan Fowler
Message 1 of 14 (165 Views)

Revit Books

165 Views, 13 Replies
06-03-2004 03:00 PM
I was wondering when some decent books will come out for Revit. A book by Autodesk Press has been listed for a year and is titled Implementing Revit 5.5 but has not been published. I am surprised that Autodesk has not published a book yet.
*Bill Adams
Message 2 of 14 (165 Views)

Re: Revit Books

06-03-2004 10:31 PM in reply to: *Stan Fowler
Stan, For some very good training books on Revit check out http://www.cdvsystems.com/productcart/pc/viewCat_P.asp?idCategory=2 hope that helps... -- ;-) Cheers bladams "Stan Fowler" wrote in message news:40bf9f82$1_2@newsprd01... > I was wondering when some decent books will come out for Revit. > A book by Autodesk Press has been listed for a year and is titled > Implementing Revit 5.5 but has not been published. I am surprised > that Autodesk has not published a book yet. > >
*Stan Fowler
Message 3 of 14 (165 Views)

Re: Revit Books

06-04-2004 08:22 AM in reply to: *Stan Fowler
Thanks Bill, I wonder when they will update to 6.1. I tried to send them an email but it was returned - are they out of business??? Cheers "Bill Adams" wrote in message news:40c0094a$1_3@newsprd01... > Stan, > > For some very good training books on Revit check out > http://www.cdvsystems.com/productcart/pc/viewCat_P.asp?idCategory=2 > > hope that helps... > > -- > ;-) Cheers bladams > > "Stan Fowler" wrote in message > news:40bf9f82$1_2@newsprd01... > > I was wondering when some decent books will come out for Revit. > > A book by Autodesk Press has been listed for a year and is titled > > Implementing Revit 5.5 but has not been published. I am surprised > > that Autodesk has not published a book yet. > > > > > >
*Jim Balding
Message 4 of 14 (165 Views)

Re: Revit Books

06-14-2004 07:49 PM in reply to: *Stan Fowler
Stan - That book has now been updated for Revit 6 and will be out shortly. The target date on the web site is now 7/8/2004. - JB "Stan Fowler" wrote in message news:40bf9f82$1_2@newsprd01... > I was wondering when some decent books will come out for Revit. > A book by Autodesk Press has been listed for a year and is titled > Implementing Revit 5.5 but has not been published. I am surprised > that Autodesk has not published a book yet. > >
*David Driver
Message 5 of 14 (165 Views)

Re: Revit Books

06-26-2004 03:13 PM in reply to: *Stan Fowler
hmmm...still working on it even as we speak 7/8 might be a bit optimistic (only a bit...) David Driver, Contributing Editor CDV Revit Courseware Series "Jim Balding" wrote in message news:40ce63b4$1_1@newsprd01... > Stan - > > That book has now been updated for Revit 6 and will be out shortly. The > target date on the web site is now 7/8/2004. > > - JB > > "Stan Fowler" wrote in message > news:40bf9f82$1_2@newsprd01... > > I was wondering when some decent books will come out for Revit. > > A book by Autodesk Press has been listed for a year and is titled > > Implementing Revit 5.5 but has not been published. I am surprised > > that Autodesk has not published a book yet. > > > > > >
*Jim Balding
Message 6 of 14 (165 Views)

Re: Revit Books

07-13-2004 02:49 PM in reply to: *Stan Fowler
David - I was refering to the Autodesk Press book and it is out now. http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. Sorry for the confusion - JB "David Driver" wrote in message news:40ddf517$1_3@newsprd01... > hmmm...still working on it even as we speak > 7/8 might be a bit optimistic (only a bit...) > David Driver, Contributing Editor CDV Revit Courseware Series > > "Jim Balding" wrote in message > news:40ce63b4$1_1@newsprd01... > > Stan - > > > > That book has now been updated for Revit 6 and will be out shortly. The > > target date on the web site is now 7/8/2004. > > > > - JB > > > > "Stan Fowler" wrote in message > > news:40bf9f82$1_2@newsprd01... > > > I was wondering when some decent books will come out for Revit. > > > A book by Autodesk Press has been listed for a year and is titled > > > Implementing Revit 5.5 but has not been published. I am surprised > > > that Autodesk has not published a book yet. > > > > > > > > > > > >
*Daniel Legarraga
Message 7 of 14 (165 Views)

Re: Revit Books

07-15-2004 10:05 AM in reply to: *Stan Fowler
The title book is "Introducing and Implementing Autodesk Revit 5.5" first edition June 29, 2004. I wonder if it's updated for Revit 6.1? or we will wait for the edition 7/8/2004. On Amazon the book is priced $33.97. Daniel "Jim Balding" escribió en el mensaje news:40f458c9$1_2@newsprd01... > David - > > I was refering to the Autodesk Press book and it is out now. > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > Sorry for the confusion > > - JB > > > "David Driver" wrote in message > news:40ddf517$1_3@newsprd01... > > hmmm...still working on it even as we speak > > 7/8 might be a bit optimistic (only a bit...) > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > "Jim Balding" wrote in message > > news:40ce63b4$1_1@newsprd01... > > > Stan - > > > > > > That book has now been updated for Revit 6 and will be out shortly. The > > > target date on the web site is now 7/8/2004. > > > > > > - JB > > > > > > "Stan Fowler" wrote in message > > > news:40bf9f82$1_2@newsprd01... > > > > I was wondering when some decent books will come out for Revit. > > > > A book by Autodesk Press has been listed for a year and is titled > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > >
*Jim Balding
Message 8 of 14 (165 Views)

Re: Revit Books

07-15-2004 03:21 PM in reply to: *Stan Fowler
Just to clear the air. There was never an edition published for 5.5. There was never a Revit 5.5. The Autodesk Press book was written during the 5.1 release and updated for 6.0/6.1. The cover shot was the original image and was distributed sometime in the 2nd quarter of 2003, and that is why there is so much confusion. Sorry - "Daniel Legarraga" wrote in message news:40f6b952$1_2@newsprd01... > The title book is "Introducing and Implementing Autodesk Revit 5.5" first > edition June 29, 2004. > I wonder if it's updated for Revit 6.1? or we will wait for the edition > 7/8/2004. > On Amazon the book is priced $33.97. > > Daniel > > "Jim Balding" escribió en el mensaje > news:40f458c9$1_2@newsprd01... > > David - > > > > I was refering to the Autodesk Press book and it is out now. > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > Sorry for the confusion > > > > - JB > > > > > > "David Driver" wrote in message > > news:40ddf517$1_3@newsprd01... > > > hmmm...still working on it even as we speak > > > 7/8 might be a bit optimistic (only a bit...) > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > "Jim Balding" wrote in message > > > news:40ce63b4$1_1@newsprd01... > > > > Stan - > > > > > > > > That book has now been updated for Revit 6 and will be out shortly. > The > > > > target date on the web site is now 7/8/2004. > > > > > > > > - JB > > > > > > > > "Stan Fowler" wrote in message > > > > news:40bf9f82$1_2@newsprd01... > > > > > I was wondering when some decent books will come out for Revit. > > > > > A book by Autodesk Press has been listed for a year and is titled > > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
*Daniel Legarraga
Message 9 of 14 (165 Views)

Re: Revit Books

07-28-2004 12:17 PM in reply to: *Stan Fowler
Any suggestion of where find Appendix A omitted in the book (just a few blank pages...). Daniel "Jim Balding" escribió en el mensaje news:40f70381$1_3@newsprd01... > Just to clear the air. There was never an edition published for 5.5. There > was never a Revit 5.5. The Autodesk Press book was written during the 5.1 > release and updated for 6.0/6.1. The cover shot was the original image and > was distributed sometime in the 2nd quarter of 2003, and that is why there > is so much confusion. > > Sorry - > > > "Daniel Legarraga" wrote in message > news:40f6b952$1_2@newsprd01... > > The title book is "Introducing and Implementing Autodesk Revit 5.5" first > > edition June 29, 2004. > > I wonder if it's updated for Revit 6.1? or we will wait for the edition > > 7/8/2004. > > On Amazon the book is priced $33.97. > > > > Daniel > > > > "Jim Balding" escribió en el mensaje > > news:40f458c9$1_2@newsprd01... > > > David - > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > Sorry for the confusion > > > > > > - JB > > > > > > > > > "David Driver" wrote in message > > > news:40ddf517$1_3@newsprd01... > > > > hmmm...still working on it even as we speak > > > > 7/8 might be a bit optimistic (only a bit...) > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > "Jim Balding" wrote in message > > > > news:40ce63b4$1_1@newsprd01... > > > > > Stan - > > > > > > > > > > That book has now been updated for Revit 6 and will be out shortly. > > The > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > - JB > > > > > > > > > > "Stan Fowler" wrote in message > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > I was wondering when some decent books will come out for Revit. > > > > > > A book by Autodesk Press has been listed for a year and is titled > > > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
*Scott Davis
Message 10 of 14 (165 Views)

Re: Revit Books

07-28-2004 01:23 PM in reply to: *Stan Fowler
www.augi.com If you are a member of AUGI already, try: http://forums.augi.com/showthread.php?t=6082 (if not you can sign up for free at the URL above) "Daniel Legarraga" wrote in message news:4107fbd2_2@newsprd01... > Any suggestion of where find Appendix A omitted in the book (just a few > blank pages...). > > Daniel > > "Jim Balding" escribió en el mensaje > news:40f70381$1_3@newsprd01... > > Just to clear the air. There was never an edition published for 5.5. > There > > was never a Revit 5.5. The Autodesk Press book was written during the 5.1 > > release and updated for 6.0/6.1. The cover shot was the original image > and > > was distributed sometime in the 2nd quarter of 2003, and that is why there > > is so much confusion. > > > > Sorry - > > > > > > "Daniel Legarraga" wrote in message > > news:40f6b952$1_2@newsprd01... > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > first > > > edition June 29, 2004. > > > I wonder if it's updated for Revit 6.1? or we will wait for the edition > > > 7/8/2004. > > > On Amazon the book is priced $33.97. > > > > > > Daniel > > > > > > "Jim Balding" escribió en el mensaje > > > news:40f458c9$1_2@newsprd01... > > > > David - > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > Sorry for the confusion > > > > > > > > - JB > > > > > > > > > > > > "David Driver" wrote in message > > > > news:40ddf517$1_3@newsprd01... > > > > > hmmm...still working on it even as we speak > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > "Jim Balding" wrote in message > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > Stan - > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > shortly. > > > The > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > - JB > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > I was wondering when some decent books will come out for Revit. > > > > > > > A book by Autodesk Press has been listed for a year and is > titled > > > > > > > Implementing Revit 5.5 but has not been published. I am > surprised > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.