Revit Architecture

Revit Architecture

Reply
Valued Contributor
kwihae
Posts: 64
Registered: ‎11-02-2011
Message 1 of 4 (431 Views)

Revit 2013 Stairs by Compoenent depth clipping in plan

431 Views, 3 Replies
12-17-2012 06:27 AM

I have a fire escape stairs running from the basement to the 4th floor on the exterior of the building.  This is built as one element.

 

Does anyone know if there is a way to clip the view of this stair so that only a portion of the stair is showing?

 

For example, I would only like to clip out the stairs in the basement in the 4th floor plan.

*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 2 of 4 (422 Views)

Re: Revit 2013 Stairs by Compoenent depth clipping in plan

12-17-2012 08:38 AM in reply to: kwihae

You could try using a Plan Region, and set the View Range specifically for your pruposes at the fire escape.

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Valued Contributor
kwihae
Posts: 64
Registered: ‎11-02-2011
Message 3 of 4 (414 Views)

Re: Revit 2013 Stairs by Compoenent depth clipping in plan

12-17-2012 09:56 AM in reply to: ccollins

Tried it, but didn't work...

 

*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 4 of 4 (401 Views)

Re: Revit 2013 Stairs by Compoenent depth clipping in plan

12-17-2012 12:27 PM in reply to: kwihae

Can you post an image or a stripped down version of the revit file?

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.