Revit Architecture

Revit Architecture

Reply
Valued Mentor
granite07
Posts: 342
Registered: ‎07-09-2010
Message 1 of 7 (4,537 Views)
Accepted Solution

revit 2013 None of the created elements are visible...

4537 Views, 6 Replies
04-04-2013 10:18 AM

I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?

 

"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."

Forest Peterson, granite@stanford.edu; build-sheet

thank you Collins, those are good suggestions.

 

After several trys I found the problem is the Wall type.

 

If I use the default generic 'Wall' or a 'Wall:Architectural' everything is fine, but the 'Wall:smileyfrustrated:tructural' results in the warning. I asked a 'BIM expert' here in the lab and he said that the structural wall type requires creating a structural plan in view/create/plan_views/structural_plan

 

nice.

*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 2 of 7 (4,525 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 10:59 AM in reply to: granite07

Check these:

 

1. Constraints of Walls to Levels--Base, Offset, Top, Offset, etc.

 

2. Check View Range of plan view--Cut plane, view depth, etc.

 

3. Check if the walls are hidden ( workset, Model category turned off, Hidden in View, etc.) Use lightbulb tool to reveal hidden elements.

 

4. Phase--if Phases are used, are walls on wrong Phase, Phase Filter not set correctly in view

 

5. Design Options--if Design Options are used, are walls on Design Option and not displayed

 

 

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Valued Mentor
granite07
Posts: 342
Registered: ‎07-09-2010
Message 3 of 7 (4,520 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 11:08 AM in reply to: granite07

thank you Collins, those are good suggestions.

 

After several trys I found the problem is the Wall type.

 

If I use the default generic 'Wall' or a 'Wall:Architectural' everything is fine, but the 'Wall:smileyfrustrated:tructural' results in the warning. I asked a 'BIM expert' here in the lab and he said that the structural wall type requires creating a structural plan in view/create/plan_views/structural_plan

 

nice.

Forest Peterson, granite@stanford.edu; build-sheet
*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 4 of 7 (4,511 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 11:22 AM in reply to: granite07

Do you mean setting the View Discipline to Structural?

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Valued Mentor
granite07
Posts: 342
Registered: ‎07-09-2010
Message 5 of 7 (4,503 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 11:28 AM in reply to: ccollins

I honestly don't know...I did not try this solution and relied on the 'BIM expert' that this is the solution. I used the 'Wall:Architectural' as a solution.

 

I will remove my solved tag - it wont let me remove the solved tag

Forest Peterson, granite@stanford.edu; build-sheet
*Expert Elite*
ccollins
Posts: 866
Registered: ‎09-28-2009
Message 6 of 7 (4,495 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 11:31 AM in reply to: granite07

Ask the BIM expert if:

 

1. View Discipline had to be set to Structural

 

2. Structural Framing Plan View Template had to be applied

Cliff B. Collins
Registered Architect/BIM Manager
Thalden Boyd Emery Architects
St. Louis, MO
Valued Mentor
granite07
Posts: 342
Registered: ‎07-09-2010
Message 7 of 7 (4,482 Views)

Re: revit 2013 None of the created elements are visible...

04-04-2013 12:00 PM in reply to: ccollins

he said "view/create/plan_views/structural_plan"

Forest Peterson, granite@stanford.edu; build-sheet
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.