Revit Architecture

Reply
Member
Winter-s
Posts: 3
Registered: ‎08-04-2013
Message 1 of 4 (372 Views)
Accepted Solution

Revit 2012 - Wall

372 Views, 3 Replies
08-04-2013 12:03 AM

I placed a wall below the staircase how to attach the wall to the slating side of the stairs. How to join the stairs to the floor slab so that it reads as a one structure?

Welcome to the Discussion!

 

Another option I would like to throw into the mix - Modify the wall profile.

 

You will need to do this is a section view of the wall - Select the wall in the section and in the Ribbon you will see the Edit Profile tool - select it. See Image edit profile.

 

Then you can modify the boundary of the wall to follow the stair. See image - modify.

 

Then finish the modify and you will see the wall follow the stair or outline you have specified. See image finish.

 

Both options will work.

 

LD

 

 

Yes, Lisa , you are right -  your solution is definitely the most appropriate in case of straight walls.

The workaround proposed by me is more suitable for  curved walls or jagged wall succesion , where the Edit  Profile for wall can not be applied to. This workaround allows. also to lock the "phantom roof" to the stair underside and thanks to this , moving the stair the wall will keep attached to it..but as any workaround is less handy  ....

 

 

*Expert Elite*
constantin.stroescu
Posts: 1,109
Registered: ‎10-29-2008
Message 2 of 4 (305 Views)

Re: Revit 2012 - Wall

08-06-2013 05:47 AM in reply to: Winter-s
  1. To attach the wall o the stair underside:
  • I propose a workaround - make a roof by extrusion as a helper using the underside line of the stair . Make a type of roof dedicated to this..a phantom roof. Attach the wall to this roof and then hide the roof..

2. In order to make a seamless conection betewen the floor slab and the stair structure:

  • make them first of the same material
  • then , the most simple method could be to make a Linework override ( Modify >View > Linework > Invisible Line)

Image 6.png

Constantin Stroescu
BIM Manager AGD
*Expert Elite*
LisaDrago
Posts: 1,392
Registered: ‎05-08-2009
Message 3 of 4 (297 Views)

Re: Revit 2012 - Wall

08-06-2013 06:27 AM in reply to: Winter-s

Welcome to the Discussion!

 

Another option I would like to throw into the mix - Modify the wall profile.

 

You will need to do this is a section view of the wall - Select the wall in the section and in the Ribbon you will see the Edit Profile tool - select it. See Image edit profile.

 

Then you can modify the boundary of the wall to follow the stair. See image - modify.

 

Then finish the modify and you will see the wall follow the stair or outline you have specified. See image finish.

 

Both options will work.

 

LD

 

 


If this helped solve your issue - remember to 'accept as solution' to help other find answers!
You can't think AutoCAD and run Revit.
Email: LisaDragoEE@gmail.com
*Expert Elite*
constantin.stroescu
Posts: 1,109
Registered: ‎10-29-2008
Message 4 of 4 (281 Views)

Re: Revit 2012 - Wall

08-06-2013 06:54 AM in reply to: LisaDrago

Yes, Lisa , you are right -  your solution is definitely the most appropriate in case of straight walls.

The workaround proposed by me is more suitable for  curved walls or jagged wall succesion , where the Edit  Profile for wall can not be applied to. This workaround allows. also to lock the "phantom roof" to the stair underside and thanks to this , moving the stair the wall will keep attached to it..but as any workaround is less handy  ....

 

 

Constantin Stroescu
BIM Manager AGD
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.