Print 1/8

[Anonymous]

Hi,
I've brainstormed for a while and can't figure out how to get REVIT to print 2 different scales. We issue DWF 2'x3' 1/4"scale full size sets, but within the office we put each plan and elevation on an 8x14" sheet at 1/8"scale. If I add a new view/camera for each 1/8" print I need, it slows REVIT down too much, plus the detailing and text doesn't appear on the second view. I would like to create the DWFs, underlay them in AutoCAD and print them, but I'm unable to control the DWF Underlay with any accuracy at all.

So, is anyone else out there printing a 1/8" set as well? And if so, how are you doing it?

Thanks, Harmen

[Anonymous]

Design/draft everything as you need for printing a real CD set (1' = 1/8" in
your case). You would print this set by specifying scale 100% in Revit print
settings dialog. In order to print enlarged DWF set specify scale 200% in
print settings dialog.

wrote in message news:5456693@discussion.autodesk.com...
Hi,
I've brainstormed for a while and can't figure out how to get REVIT to print
2 different scales. We issue DWF 2'x3' 1/4"scale full size sets, but within
the office we put each plan and elevation on an 8x14" sheet at 1/8"scale.
If I add a new view/camera for each 1/8" print I need, it slows REVIT down
too much, plus the detailing and text doesn't appear on the second view. I
would like to create the DWFs, underlay them in AutoCAD and print them, but
I'm unable to control the DWF Underlay with any accuracy at all.

So, is anyone else out there printing a 1/8" set as well? And if so, how
are you doing it?

Thanks, Harmen