Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have a wall with 25mm thick external stone cladding with 50mm wide gap between wall and cladding. Please help me how to change the pen thickness in REVIT only for the stone cladding.
Are you doing this as a detail in a detail or drafting view using line work?
Have you looked for existing detail components for cladding and structural
components?
wrote in message news:5226238@discussion.autodesk.com...
I have a wall with 25mm thick external stone cladding with 50mm wide gap
between wall and cladding. Please help me how to change the pen thickness in
REVIT only for the stone cladding.
It is basic generic wall structure with cladding. Under wall parameter/construction/structure/function i added 50mm thermal/air layer & 25mm thick finish1 layer with stone cladding material finish. Since 25mm thick finish under same wall family, it will print with same pen thickness as wall. I want thin line thickness only for the finish.
